Overview
In this quest, you will model and design a three-span, 300 m balanced cantilever PSC box girder bridge in MIDAS CIVIL NX. Using the FCM Bridge Wizard, you will define the bridge geometry, materials, variable box sections, construction sequence, member ages, and tendon profiles. You will also configure time-dependent concrete properties, including creep, shrinkage, and compressive strength development. You will apply construction loads, temperature effects, M1600 moving loads, response spectrum loads, and support settlement. After performing construction stage and moving load analyses, you will evaluate girder stresses, deformations, tendon losses, stress history, and FCM camber. Finally, you will generate load combinations based on AS 5100.2:2017 and complete the PSC box girder design and reporting in accordance with AS 5100.5:2017. By completing this quest, you will be able to: - Build a balanced cantilever PSC bridge using the FCM Wizard. - Define tendons and time-dependent concrete properties. - Simulate the bridge construction sequence. - Evaluate construction-stage behavior, tendon losses, and camber. - Perform PSC design and generate a detailed design report.
教材
要件
- Submit the model generated as per the attached tutorial
- Submit a document with screenshots for deflection, forces & camber plots
- Submit PSC design report for span mid box girder section
